The Defender range uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage protecting your valuable equipment from power line disturbances. The stylish LCD display, user replaceable batteries and six Australia/NZ sockets make the Defender the complete package at this level.
The Defender USB communication port is compatible with Synology NAS products. NetGuard™ UPS management software included.
Specifications
- Capacity: 1600VA / 960W
- Topology: Line Interactive
Input
- Voltage: 240Vac (Nominal)
- Voltage Range:177-290Vac
- Frequency Range:50/60Hz±5Hz (Auto sensing)
Output
- Output Voltage: 240Vac±10%
- Frequency: AC mode tracks utility.
- Battery mode: 50Hz±1%
- Frequency Range: 50Hz or 60Hz±1Hz
- Transfer Time: 6ms (Typical)
- Waveform (Battery Mode): Simulated Sine Wave
- Outlets: 3x Surge Protection and, 3x Surge Protection + UPS
Battery
- Battery Type & Number: 12Vx9AH (x2)
- Typical Recharge Time: 6 hours recovery to 90% capacity
- Backup Time (50% Load): 10 mins
Protection
- Full Protection Overload, discharge, thermal, short circuit and overcharge protection
- Surge Protection: 936Joules / 19500Amps
Communications and Management
- Interface: USB Interface
- Software: NetGuard® supports Windows®, Linux, Unix & MAC
- LCD Alarm: AC Mode, Battery Mode, Low
- Battery: (Batt. Mode), Fault, Overload
- Audible Alarm: Battery Mode, Low Battery (Batt. Mode), Fault, Overload
Physical
- Dimensions (D x W x H): 397 x 146 x 205mm
- Net Weight: 11.5kg
Operating Environment
- Temperature: 0 – 40°C
- Humidity: 0 – 90% (RH Non-condensing)
- Noise Level: <5dB (no fan)
Compliance
- Safety: EN62040-1-1 2003. IEC60950-1 : 2001
- EMC: EN62040-2 2006
- RoHS: Directive 2011 / 65 / EU