NV-600 is a VDSL2 router equipped with four 10/100 Ethernet ports. It is compliant to ITU-T G.993.2 standard and supports VDSL2 30a profile that features 100Mbps of symmetric data and it is perfectly suitable for triple-play applications. NV-600 is a cost effective solution that delivers high-speed Internet access to end-users over existing copper wire infrastructure and is designed to meet the requirements of ISPs and carriers that intend to cover end users in different loop range areas.
The NV-600L/NV-600A acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect the maximum data rate of 100Mbps and up to 3km distance support. It is easy-to-use which do not requires installation of additional wiring. Every modular phone jack in the building can become a port on the LAN.
Specifications
- Standard: IEEE802.3/802.3u/802.3z standards. ITU-T G992.1/G992.3/G992.5/G993.1/G997.1/G993.2 standards
- Physical Interface: 4x RJ-45 10/100/1000Mbps Ethernet port, 1x RJ-11/Terminal Block connector for VDSL2 line port, 1x RJ-11 connector for POTS/ISDN device, 1x console port(RS232C/115200bps)
- LED Indicators: 1x Power LED, 4x Link/Active Status for Ethernet port, 1x Link LED for VDSL2 port
- Switch method: Store and forward
- Flow control: Full duplex: IEEE 802.3x. Half duplex: Back pressure
- Typical Power Consumption: 6.7W
- Power Input: Input Voltage: 12 VDC
- EMC: EMI Compliant: FCC Class B
- EMS Compliant: CE mark Class B
- Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
- Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
- Humidity: 10 to 90% (non-condensing)
- Dimensions: 184 x 146 x 40mm (7.2″ x 5.74″ x 1.57″)
- Chipsets: Lantiq VRX