The PB-100ST takes TAKEX Twin beam technology and increases the pitch between upper and lower beams for greater stability in open-field environments.
- Synchronised Twin Beams for high reliability.
- Double Modulated beam for unsurpassed immunity to direct and reflected sunlight, vehicle headlights and other light sources.
- Built-in view finder and monitor jack output for easy beam alignment.
- 180 degree rotating optics for increased installation flexibility.
- Automatic Gain Control circuit.
This product should be installed by a certified security technician.
Specifications
- Product type: Photoelectric Beam Sensor
- Detection system: Simultaneous breaking of 2 beams
- Infrared beam: LED pulsed beam, Double modulation
- Protection distance: Outdoor 100m (330ft) or less. Indoor 200m (660ft) or less. Max. beam range Outdoor 1000m (3300ft) or less. Indoor 1000m (3300ft) or less
- Response time: 50msec. to 700msec. (Variable at pot)
- Supply voltage: 10V to 30VDC (Non-polarity)
- Current consumption: 80mA or less
- Alarm output: Dry contact relay output form C
- Contact action: Interruption time + delay time
- Contact capacity: 30V AC/DC, 0.5A or less
- Tamper output: Dry contact relay N/C
- Action: Activated when cover is detached
- Contact capacity: 30V AC/DC, 0.5A or less
- Alarm LED: Red LED (Receiver). ON: when an alarm is initiated.
- Attenuation LED Red LED (Receiver). ON : when beam is attenuated.
- Functions: Monitor jack output, AGC circuit, Frost proof cover
- Ambient temperature range: -25°C to +60°C (-13°F to +140°F)
- Mounting positions: Indoor / Outdoor
- Wiring Terminals
- Weight Transmitter: 1200g (42oz)
- Receiver: 1200g (42oz)
- Appearance: PC resin (wine red)