NESS D16X Deluxe Panel and Navigator Touch Screen

Specifications:

• BOX DIMENSIONS (W – H – D): 235 x 300 x 90 mm
• POWER SUPPLY: 17VAC 1.4 amp Supplied
• POWER SUPPLY: 13.8v DC @ 800mA
• QUIESCENT CURRENT DRAW: 80mA with 1 keypad
• OPERATING VOLTAGE: 17VAC / 15V DC
• RECHARGEABLE BATTERY: 12 volt 7.0 Amp/hour Sealed lead Acid
• BATTERY CHARGING CURRENT: 350mA maximum, current limited
• DYNAMIC BATTERY TEST: Backup battery is tested under load, hourly and on arming
• FUSES: 2 Amp auto resetting / Siren output & Reset output.
  500mA auto resetting / 12 volt auxiliary outputs.
  200 mA auto resetting / Strobe output
• ZONE OUTPUTS: 16 zone inputs. 2 x 24hr tamper inputs
• END OF LINE RESISTOR: Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k)
• MAXIMUM KEYPADS: 3 x Navigator Touch Keypads max.
• INTEGRATED RADIO OPTIONS: Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
• SERIAL HEADER: Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
• INTEGRATED ACCESS CONTROL: Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
• SIREN OUTPUT: On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
• STROBE OUTPUT: 12v DC timed output. Maximum 2 x 1 Watt strobe lights
• RESET OUTPUT: 12v DC timed output. Max. 3 x 12v piezo screamers
• EQUIPMENT POWER OUTPUT: 13.8v DC output for powering detectors and other equipment. Maximum 500mA
• AUX READER: Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC