Dynamix UPSD1600 Defender 1600VA (960W) Line Interactive UPS

Dynamix Defender 1600VA (960W) Line Interactive UPS, 3 x NZ Power Sockets with Surge + Battery Backup, 3 x NZ Power Sockets with Surge 936J.

The Defender range uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage protecting your valuable equipment from power line disturbances. The stylish LCD display, user replaceable batteries and six Australia/NZ sockets make the Defender the complete package at this level.

The Defender USB communication port is compatible with Synology NAS products. NetGuard™ UPS management software included.

Specifications:

• Capacity: 1600VA / 960W
• Topology: Line Interactive
• Input Voltage: 240Vac (Nominal)
• Voltage Range:177-290Vac
• Frequency Range:50/60Hz±5Hz (Auto sensing)
• Output Voltage: 240Vac±10%
• Frequency: AC mode tracks utility.
• Battery mode: 50Hz±1%
• Frequency Range: 50Hz or 60Hz±1Hz
• Transfer Time: 6ms (Typical)
• Waveform (Battery Mode): Simulated Sine Wave
• Outlets: 3x Surge Protection and, 3x Surge Protection + UPS
• Battery Type & Number: 12Vx9AH (x2)
• Typical Recharge Time: 6 hours recovery to 90% capacity
• Backup Time (50% Load): 10 mins
• Full Protection Overload, discharge, thermal, short circuit and overcharge protection
• Surge Protection: 936Joules / 19500Amps
• Interface: USB Interface
• Software: NetGuard® supports Windows®, Linux, Unix & MAC
• LCD Alarm: AC Mode, Battery Mode, Low
• Battery: (Batt. Mode), Fault, Overload
• Audible Alarm: Battery Mode, Low Battery (Batt. Mode), Fault, Overload
• Dimensions (D x W x H): 397 x 146 x 205mm
• Net Weight: 11.5kg
• Temperature: 0 – 40°C
• Humidity: 0 – 90% (RH Non-condensing)
• Noise Level: <5dB (no fan)
• Safety: EN62040-1-1 2003. IEC60950-1 : 2001
• EMC: EN62040-2 2006
• RoHS: Directive 2011 / 65 / EU

Documentation:

• Datasheet