Hikvision DS-PD2-D15E 15m Dual Tech PIR Motion Sensor Detector

The DS-PD2-D15E features Dual element pyro-electric sensor with X-band DRO based microwave both of which need to be triggered to set off the Alarm, this reduces the risk of false alarms.

With Blue Wave Technology and digital temperature compensation the detector will adjust its sensitivity to the environment. 10m Volumetric detector 10m Volumetric detection coverage.

Ideal for protection of rooms, offices etc. Selectable EOL resistors The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market. AND/OR technology AND’ mode operates as a standard dual technology detector. ‘OR’ mode will switch to microwave detection in environments where there is a risk of PIR detection being blocked.

Blue Wave Technology (BWT)

This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of 2 key components: 1). The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges. 2). Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

Auto Sensitivity Feature

Depending on the environment condition, the detector will automatically adjust the sensitivity Digital Temperature Compensation When the product is used in a hot environment this technology digitally adjusts the detector’s sensitivity allowing it to maintain its range even when the background room temperature is almost equal to the external body temperature of 32ºC (internal body temperature = 37ºC) Active self test If there is no activation after a 5 hour period it will actually self test both the PIR and microwave Triple LED indication Microwave – orange, PIR – green, alarm – blue Microwave Frequencies Bands 3 different frequency bands to avoid interference between detectors are installed in the same room.

This product should be installed by a certified security technician.